Vivitek D512-3D Spécifications télécharger pdf (Page 49)

—

’

– 42 –

LED Error Messages

ERROR CODE MESSAGES

POWER LED

BLINK

OVER TEMP

LED

LAMP LED

BLINK

Over temperature 0 ON 0

Thermal break status error 4 0 0

Lamp error 0 0 On

Fan1 error 6 0 1

Fan2 error 6 0 2

Fan3 error 6 0 3

Lamp door open 7 0 0

DMD error 8 0 0

Color wheel error 9 0 0

In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-

starting the projector. If the Power or Lamp LEDs are still blinking or the Over Temp LED is lit, or any

other situation that isn't listed in the chart above

, please contact your service center.

Image Problems

Problem: No image appears on the screen

1. Verify the settings on your notebook or desktop PC.

2. Turn off all equipment and power up again in the correct order.

Problem: The image is blurred

1. Adjust the Focus on the projector.

2. Press the Auto button on the remote control or projector.

3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.

4. Check that the projector lens is clean.

Problem: The image is wider at the top or bottom (trapezoid effect)

1. Position the projector so it is as perpendicular to the screen as possible.

2. Use the Keystone button on the remote control or projector to correct the problem.

Problem: The image is reversed

Check the Projection setting on the Installation I menu of the OSD.

Problem: The image is streaked

1. Set the Frequency and Tracking settings on the Computer menu of the OSD to the de-

fault settings.

2. To ensure the problem is not caused by a connected PC’s video card, connect to another

computer.

Problem: The image is flat with no contrast

Adjust the Contrast setting on the Image menu of the OSD.

Problem: The color of the projected image does not match the source image.

Adjust the Color Temperature and Gamma settings on the Image menu of the OSD.

Downloaded From projector-manual.com Vivitek Manuals

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 60 61

Commentaires sur ces manuels

Pas de commentaire

Vivitek D512-3D Spécifications Page 49

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Vivitek D512-3D